A perfect cold air intake makes your journey blissful. Because it increases your vehicle’s horsepower in a rigorous form.
Today we will talk about one of the popular cold air intake K&N. It is one of the top-class products that comes in the market after many tests with precise engineering. Again, it is viable with the ease of installation so you will have the least hard time following the step by step instructions.
K&N is not only a good bait under the bucks but also, it is a long lasting choice. Here is why, after consumer’s research of this product, we find 70% of users re-purchase in the future.
If you go ahead and read our reviews of it then you will find your suitable cold air intake for your vehicle.
Read: Best Aftermarket Cold Air Intake
Is it a Wise Decision to Buy Cold Air Intake from K&N Brand?
K&N would be a perfect choice for those who want to hear the perfect sound of their engine and at the same time want to get more mpg. We research and get to know if your car mpg has stuck at 25 mpg then this will take you up to 25.5 MPG after every drive.
To go to the break even point of your investment isn’t that easy, especially when you are not a regular rider on the road. However, you can’t avoid getting the benefit of higher torque and better engine performance.
From our observation, we found this will take you to the break even point after 100k miles while calculating the mpg will increase a bit from 25 to 25.5.
Yes, it is not that money saving when you are totally focused on this term. Taking care of your engine performance would be the key reason why you should invest in it and it sounds like a wise decision to buy it.
Top Rated KN Cold Air Intake in 2023
Image | Name | Fits For | Rating | Price |
 | K&N 63-3082 Cold Air Intake Kit | Chevrolet Silverado & Vehicle Specific | ||
 | K&N 57-3058 Cold Air Intake | GMC Sierra, | ||
 | K&N 69-1213TS Cold Air Intake | Honda Accord & Vehicle Specific | ||
 | K&N 63-2593 Cold Air Intake Systems | Ford F150 & Specific Vehicle | ||
 | K&N 63-1564 Cold Air Intake Kit | Dodge/Chrysler & Specific Vehicles |
K&N Cold Air Intake Reviews with Guide
From above, you learned why you should get the cold air intake from K&N. Now, it’s time to check the details that make the K&N CAI systems best.
1. K&N 63-3082 Cold Air Intake Kit
Stainless Steel Clamp Material
7.5 in (191 mm) Air Filter Height
Gain 10.68 HP @ 5341 RPM Horsepower
Fits for Chevrolet Silverado & Vehicle Specific
Make a little investment to buy this upgrade and gain better outputs! We find no words like these that resemble the K&N 63-3082 Cold Air Intake. It features every attachment and requires only commonly used tools like wrench, extension, and Allen wrench to make the installation process a piece of cake.
Some of you may not like the sound volume it adds (this makes a badass sound). But the gains of extra added horsepowers and mileage outweighs that extra rumble coming out from the engine bay. This air intake fits your 2014-2020 Chevy, GMC, and Cadillac. So, go and get it to bring back life to your car.
HDPE Rotationally-molded Tube: The air intake system features a roto-molded HDPE tube, helping to increase the airflow to your engine. And you know the more air draws into your engine, the more horsepower you will gain. This CAI system offers 10.68 horsepower to boost up your car performance.
Oversized Reusable High-Flow Air Filter: An oversized air filter changes the game of filtration and impacts your car performance. K&N 63-3082 has a conical design, and extra-large size filters can catch more debris. So, you can go up to 100k miles under normal driving conditions, and you don’t need to clean the filter before that.
Oiled Cotton Filter Media: You don’t want your car engine to get damaged by contaminants. And this air intake ensures the safety of your car engine. The air filter has thousands of microscopic cotton fibers. Because of this innovative design, dirt or pollen can’t reach your engine, which prolongs your engine life.
Heat Shield: A custom heat shield protects this air intake from the high temperature of your car engine and ensures its longevity.
Read: Best AFE Cold Air Intake
2. K&N 57-3058 Cold Air Intake
Improve Engine Sound
Designed to Increase Horsepower
Oversized Washable High-Flow Air Filter
Fits for GMC Sierra, Chevrolet Silverado & Vehicle Specific
If you are looking for a performance upgrade for your car, it is worth ten times better to get this CAI system from K&N. The air intake system provides 17.55 horsepower at 4917 RPM.
Due to its increased horsepower, it increases the throttle response noticeably. Your car doesn’t sound like its engine is struggling anymore because of the air intake. Therefore, you can observe the increase in mileage as it produces extra horsepower & torque.
Roto-molded HDPE intake tube: Low restriction roto-molded HDPE tube ensures maximum airflow to your car engine. In return, the air intake generates more horsepower & torque as more air will draw into your car engine.
Washable High-flow Air Filter: The performance of an air intake also depends on your CAI’s air filter. An oversized filter allows more air to get into the engine to improve horsepower.
Besides, the extra-large size air filter can trap and hold more dirt & debris. So, you don’t need to tidy up the filter frequently. And when the filter gets dirty, you can wash it away with water and reuse it for years to come.
Sturdy Design: The longevity of an air intake system is a must criterion you should consider. It is inevitable as you don’t want to get a CAI system that gets damaged after one or two months of use.
The intake pipe of this air intake uses High-Density Cross-Linked Polyethylene, which can resist corrosion and ensure durability. Therefore, this CAI has a custom heat shield, protecting your air intake from the heat coming out from your car engine.
Prolong the Engine Life: Its air filter has hundreds of microscopic cotton fibers. So, dirt, debris, and filth can’t penetrate the filter and reach your car engine. In return, your car engine remains dirt-free, adding longevity to it.
Read: Best AEM Cold Air Intake
3. K&N 69-1213TS Cold Air Intake
Steel Material Clamp
Aluminum Intake Pipe Material
Gain 5.19 HP @ 5378 RPM Horsepower
Fits for Honda Accord & Vehicle Specific
Do you want your 2015 Honda accord 2.4 to make a nice growling sound and provide you the power you need for smooth riding? Then, this modification into your engine compartment will make a big difference.
The air intake system provides a maximum of 5.19 HP at 5378 RPM. It wakes up your car engine allowing it to take a deep breath. In return, you will get an increased throttle response, rumble sound, and of course, an increased gas mileage.
Increase Horsepower & Torque: A low restricted mandrel-bent intake pipe allows air to draw into your car engine freely. As a result, the car engine gets ample air to satisfy its hunger and boosts up horsepowers & torque.
Durable Design: You can use the air intake system year to come because of its sturdy construction. The intake pipe uses aluminum which can withstand corrosion.
Therefore, it has a custom heat shield to protect the intake from high-temperature emissions from the car engine. In other words, heat can’t bring any damage to the CAI system.
Reusable Air Filter: Like other K&N air intakes, this one also has an oversized air filter to allow more air to draw into the engine with no restriction. The filter is made with cotton gauges. It means you can wash it and reuse it for years to come by removing the dirt & debris.
Custom Heat Shield: You don’t need to worry about the safety of your air intake into the engine compartment. A custom heat shield ensures the longevity of the intake by protecting it from high temperatures coming out from your engine.
4. K&N 63-9036 Cold Air Intake
Stainless Steel Clamp Material
Cotton Gauze Air Filter Material
Gain 9.25 HP @ 5497 RPM Horsepower
Fits for Toyota Tundra & Specific Vehicles
Bring back juvenility to your 2014 Toyota Tundra Crew Cab 5.7 V8 by putting this air intake under your car hood. Its performance, fit, finish, and easy installation outweighs other after-market air intakes.
We were impressed observing the performance it provides. It features a low restriction intake tube to draw more air into the engine to boost horsepower up to 9.25HP. Besides, this air intake also increases throttle response, and you will hear the roar when you get into the deeper throttle.
Boost up Horsepower & Torque: Boosting up horsepower and torque of your car is the key purpose behind purchasing an air intake. And this CAI from K&N serves your needs.
Its low restriction intake pipe and oversized air filter allow more air to travel your car engine. In return, your car gets more horsepower it needs for smooth riding.
Washable and Reusable Air Filter: No one likes to change the air filter every year. So, it will be better to get an air intake system that is washable and reusable.
Fortunately, this air intake system is paired with a high-flow air filter. You can suck away dirt, debris, and pollen that traps into the filter with water and reuse it.
Protect Your Engine from Damage: Dirt, contaminants, and pollen are the enemy of your car engine. They don’t only reduce the efficiency of the engine but also bring damage to it.
But putting this air intake into your engine compartment, you can expand the life of the engine. The CAI system has a dedicated air filter that catches every dirt and prevents them from reaching your car engine.
Easy Installation: You don’t need to hassle to put the air intake into your engine compartments. The air intake system comes with every attachment like clamps and screws. Plus, it includes user-friendly instruction. Following the installation direction step by step, it takes 90 minutes to install the air intake.
5. K&N 63-2593 Cold Air Intake Systems
Stainless Steel Clamp
Cotton Gauze Air Filter Material
Gain 19.37 HP @ 4500 RPM Horsepower
Fits for Ford F150 & Specific Vehicle
Is your 2018 Ford F-150 2.7L Ecoboost choking due to lack of cold air? Then, bring a modification to your F-150 by installing this air intake from K&N. It feeds your car engine by providing ample airflow and allows your car to take a deep breath.
Unlike other K&N CAI systems, it provides a maximum of 19.37HP to boost up your car performance. To discover more breathtaking features, continue to read this review section.
Improve Horsepower & Torque: Its aerodynamic tube design helps to ensure the maximum airflow enters your car engine. And this increased amount of air contributes to boosting up horsepower and torque.
Oversized Air Filter: The size of the air filter matters a lot. An oversized filter can trap more dirt, and you don’t need to empty it frequently. Therefore, an extra-large air filter allows more air to draw into your car engine to increase horsepower.
Oiled cotton filter media: Unique design and oiled cotton media prevent contaminants from reaching your engine. Plus, the air filter contains thousands of microscopic cotton fibers. As a result, dirt or debris can’t penetrate the fiber wall to go into your car engine.
A Custom Heat Shield: To protect the air intake from high temperature, it has a custom heat shield. The shield is coated with heat-resistant powder. So, air temperature coming out from your car engine doesn’t bring any damage to your air intake.
6. K&N 63-9039 Cold Air Intake Kit
Cotton Gauze Air Filter Material
Designed to Increase Horsepower
Gain17 HP @ 5374 RPM Horsepower
Fits for Toyota Tacoma & Specific Vehicles
Getting an aftermarket air intake system that fits your 016-2019 Toyota Tacoma is challenging. But the K&N 63-9039 CAI System will prove you wrong.
It is specially designed and dyno-tuned to boost up the horsepower of your Toyota Tacoma. On top of this, it is easy to install and improve the throttle response. To learn more about it, keep scrolling.
Increase Horsepower & Torque: Like other K&N cold air intakes, it features a roto-molded HDPE tube. This low restriction tube allows more air to travel through the filter to your engine. As a result, your engine gets enough airflow to breathe and gains peak performance by boosting horsepower up to 17HP.
Large Air Filter: An advanced filtration system increases the efficiency of an air intake. This CAI from K&N has an oiled cotton media that filters air effectively by shielding contaminants.
Therefore, it can trap & catch a large amount of debris due to its oversized air filter. In return, the filter doesn’t require frequent cleaning until you drive your car up to 100k miles.
Require Minimum Maintenance: As we mentioned above, it has an extra-large air filter. It means this CAI system can hold more debris & dirt compared to other air intakes in the market. So, the air filter doesn’t require a frequent cleanup. On top of this, it is washable & reusable and you don’t need to put a lot of elbow grease to maintain it.
7. K&N 63-1564 Cold Air Intake Kit
Stainless Steel Clamp Material
Cotton Gauze Air Filter Material
Gain 8.09 HP @ 5231 RPM Horsepower
Fits for Dodge/Chrysler & Specific Vehicles
Get ready to modify your Dodge Challenger or Chrysler Charger by installing this air intake that comes from K&N. It features an easy-to-follow direction to make the installation process easy like you go and get it.
Besides, the air intake provides a maximum gain of 8.09HP to improve throttle response. As it increases throttle, it also gives you a nice rumbling sound as an exhaust provides. Therefore, it also improves gas mileage.
Boost Up Horsepower & Torque: The air intake system is dyno-tuned and specially designed to increase horsepower. Its aerodynamic tube design and low restricted pipe allow more air to draw and travel freely to your car engine. And the more air your car engine receives, the more horsepower you will get.
Washable Air Filter: Like other K&N CAI systems, it features a washable and reusable air filter. When it gets dirty, you can clean it with water and reuse it to filter air optimally.
Heat Shield: This air intake system has a built-in air intake system that is coated with heat-resistant powders. Due to this, the high temperature that comes from your car engine can’t bring any damage to the CAI system.
Check out what a K&N Performance Air Intake System can do for your vehicle
How to choose K&N cold air intake?
Consider the following criteria before purchasing an air intake system to pick the right one for your car.
Would it fits your car or Not
Not every K&N cold air intake will fit your car. Each of the CAI systems is designed to fit a specific vehicle. So, it would be better to check your car’s year, make, and model before purchasing an air intake system.
Horsepower
How much horsepower the air intake provides matters a lot. The performance of your car is directly related to horsepower. You can drive your car smoothly when you get more horsepower from the engine.
Tube
The tube is a crucial feature of an air intake system. A low restriction intake tube draws more air into your car engine. And guess what, the more air enters your car engine, the more horsepower you will gain. As a result, you can get the power you need for a smooth drive. Therefore, an increased airflow will also improve the throttle response.
Air Filter
Advanced filtration mostly depends on the air filter of the air intake. Most air filters that come from K&N have thousands of microscopic fibers. As a result, those air filters can catch tiny particles and provide cold air to draw into the engine by filtering the air.
Construction Material
Durability is another inevitable criterion you must take into account. How long your air intake will last depends on the construction material. Fortunately, every K&N air intake system is made with High-Density-Cross-Linked-Polyethylene. So, you don’t need to worry about its longevity.
Safe your car engine or not
Each of the K&N air filters has an oiled cotton filter media. Due to it, dirt, particles, and pollen can’t reach your car engine and increase the engine’s lifespan.
Heat Shield
Most air intakes from K&N have built-in heat shields. As a result, high temperature coming out from your car engine can’t bring any damage to your air intake. In simple words, the air intake system will last for a long time.
Maintenance
Every K&N air intake system requires a low maintenance workflow. Each of the intake systems has a washable air filter. You can clean them with water and reuse them. Therefore, the large air filter can catch & trap more debris. So, you don’t need to empty it frequently.
Air Intake Installation Guide
Here is the detailed air intake installation guide. Carefully watch the video.
It’s important to carefully follow the manufacturer’s instructions for your specific intake system, as well as any additional instructions provided by the vehicle manufacturer.
If you are unsure about any part of the installation process, it’s always a good idea to consult a professional mechanic for assistance.
Can a K&N cold air intake be installed on any vehicle?
No, a K&N cold air intake is designed to fit specific makes and models of vehicles. It is important to choose the correct cold air intake for your vehicle to ensure a proper fit and optimal performance. K&N offers a wide range of cold air intake kits for a variety of vehicles, and their website provides a search tool to help you find the right cold air intake for your vehicle.
How much HP does a K&N cold air intake add?
The actual increase in horsepower will depend on a number of factors, such as the make and model of your vehicle, and the condition of the rest of your engine. In general, K&N cold air intake increase is usually in the range of 15-25 additional horsepower, but it can vary depending on the specific vehicle and other factors.
Will a K&N air filter improve gas mileage?
A K&N air intake can potentially improve gas mileage. K&N air intake are designed to allow for increased airflow to the engine, which improve combustion and result in better fuel efficiency.
However, the actual increase in gas mileage will depend on a number of factors, such as the make and model of your vehicle, and the condition of the rest of your engine.
What’s better, K & N or S&B?
K&N cold air intake is better if you need the roaring sound. On the other hand, S&B will be excellent to get a functional air intake system.
What air intake brand gives the most horsepower?
It is not accurate to say that a specific brand of air intake will give the most horsepower on every vehicle.
The amount of horsepower an intake can provide will depend on a number of factors, such as the make and model of the vehicle, the condition of the engine, and the type of intake being used.
K&N and Injen, are known for their ability to provide significant increases in horsepower on the right vehicle
Conclusion
To boost up your car performance, you can rely on the air intake that comes from K&N. This manufacturer provides premium quality CAI systems with greater horsepower. Installing them into your car, you will get the power you need for smooth driving.
In this guide on K&N Cold Air Intake Reviews, we mentioned the 7 best CAI systems on the above list. Each of them is functional, easy to install, and lasts for a long time. So, you can go for any of them.
Keep in mind; each air intake system is designed to fit a specific vehicle. We recommend you to check your car’s model first before purchasing one.
